How to Use a Kitchen Faucet Hose Repair Kit

Keeping a nivito hose repair kit is an essential tool in the event of a leaking faucet. These kits are designed to help you fix a number of common plumbing problems. The most common problem is a leaking crimp sleeve. However, these hoses can also be damaged if they are not properly installed. To fix a leaky crimp, you need to know how to tighten the crimp. You can use a pair of pliers to loosen the crimp sleeve. Alternatively, you can purchase a basin wrench.

Locate the water supply valves

To replace the hose, you must first locate the water supply valves underneath your sink. There are various styles of these valves, so you'll need to find one that matches the one on your faucet. This way, you'll be able to get to the hard-to-reach areas in the spout. Then, you can carefully unscrew the spout of your faucet and remove the hose.

Use the basin wrench

You can use the included basin wrench to remove the hose from the faucet. This tool is very useful in difficult-to-reach places under the sink. In addition to removing the old hose, it's also possible to replace the spray head. If the spray head is leaking, you'll need to replace the entire hose. To replace the spout, you'll need to remove the spout and pull out the old tangle. Then, reconnect the water supply and feed in the new tangle of hose.

Clean the aerator

In case the aerator is the problem, you may just need to clean it. You can boil the hose in vinegar for 30 minutes to clear out the clog. The spray head may not be snugly positioned inside its cradle, but if it does, you can manually clear it with a pin. If the cradle is damaged, you may need to replace it with a new one.



After dismantling the hose, it's time to replace the aerator. You can replace the aerator in a pull-out kitchen faucet. If the aerator is damaged, you'll need to replace the plastic weight. If the aerator is damaged and the spray is not working, you need to buy a new one. You can find the necessary parts at a local hardware store.

Connect to the water supply

The hoses on a kitchen faucet are connected to the water supply in different ways. The spout has to be open in order to remove the faucet's hose. If the hose is plugged in, you'll need to disconnect the water supply valves under the sink and replace it with a new one. Afterwards, you'll need to install a new spout.